Carbon Cleaner Machine

Description

Why its required?

Engine carbon deposits have a measurable effect on performance, emissions and fuel economy. Routine carbon cleaning has been shown to prevent these problems, and remedial cleaning removes more severe deposits that have already formed.

Carbon deposits have been a problem for the Internal combustion engine since it was invented. It is a known fact that carbon deposits in Internal Combustion Engines reduce engine performance, reduce fuel efficiency, shorten engine/equipment/parts life and increase engine out emissions. In the quest to improve engine performance, reduce pollutants in the atmosphere and increase engine fuel efficiency .

To meet these ever increasing regulations manufacturers are employing additional emission controls to the Internal Combustion engines. Simply put, the manufactures are asking the Internal combustion engine to do more things than it was ever designed to do. As a result, the carbon deposit problem has become more frequent and severe, creating a whole new set of problems and challenges.

Many technicians and managers are well aware that severe combustion chamber carbon build up can create significant driveability issues with today’s engines. It’s all too rare, however, for them to focus on the fact that carbon build up and slowly deteriorating injector performance is a gradual process that not only affects engine performance but fuel economy as well. Despite this info, the vast majority of these potential issues remain unsolved.

How does HYDROGEN clean carbon deposit in the engine?

The Hydrogen Carbon clean unit runs on distilled water and electricity. The hydrogen and oxygen are produced using a mix of distilled water and electrolysis, this is then feed into the engine via the air intake/breather hose or air box.

The increased internal oxygen proportion improves combustion and at the same time the catalytic properties of hydrogen make it possible for the combustion carbon to be gradually broken down to clear the internal carbon deposits.

A strong electric current splits the water molecule (H2O) into its component atoms producing highly charged particles of hydrogen and oxygen, or oxy-hydrogen (HHO). The HHO is passed into the engine and burnt as the engine runs mixing the HHO with the fuel. As it passes through the induction system, combustion chamber, exhaust etc, the hydrogen reacts with the carbon deposits turning the carbon into hydrocarbons, this lifts the carbon deposits from the engine and the resulting gas exits the engine via the exhaust system.

Using no harsh chemicals the treatment returns your engine to a state of cleanliness. You regain power and performance, restore lost MPG and drastically cut emissions.

After treatment, there is no need to change engine oil or any type of filter.

The machine acts to restore the optimum performance of your engine. Using hydrogen technology, carbon deposits are removed from the inner workings of the engine, which naturally build up during the lifetime of the vehicle.

By removing unwanted carbon build up, further engine deterioration and damage can be avoided. This will keep your engine working more effectively and smoothly for longer, creating an enhanced driving experience.

The technology works with all types of vehicle’s – from motorbikes to planes if it has a combustion engine then it can be cleaned. Both petrol and diesel and LPG engines will show improvements irrespective of vehicle age and/or value.

The Truth

The effect of carbon cleaning on your Engine is dependent on how “dirty” the engine is.This is down to a number of different things, driving style, mileage, fuel used etc.

The below list will give you an idea of whether it’s something you would be likely to benefit from.

1. 1. Constant Low rev driving.
   2. Short journeys.
   3. Lots of stop-start journeys.
   4. Long idling.
   5. Poor quality fuel